How to forward unanswered calls on Verizon

Set up a mobile line

  1. From the Verizon SIM the public number rings, dial *71[number] with the destination’s area code and seven-digit number.
  2. Press Call. Wait for the series of beeps and for the call to end. Verizon lists three to six rings for a no-answer transfer.
  3. To undo it, dial *73 from that mobile line and wait for the tones. Check your previous voicemail or other route with a second call.

Verizon documents *72 for immediate forwarding. If callers suddenly skip your phone every time, check whether immediate forwarding is active. Set the wireless codes in Verizon coverage. If the phone is powered off or loses signal, test that path on the actual line before you rely on it.

For a managed Verizon Business Wireless line, the account administrator can also open the number in My Business Wireless and use Manage Call Forwarding from the Device Info tab.

Set up Business Digital Voice

In the Business Digital Voice User Portal open Call Settings, then Call Forwarding. Enable When No Answer, enter the destination and choose how many times the desk phone should ring. Save it. Set When Busy separately and save that rule too. To revert a rule, switch it off or restore your previous destination and save.

For a network or service interruption, Verizon documents Business Continuity as a separate administrator setting. Ask your administrator to set the fallback and arrange a test. An ordinary no-answer test proves the ring timeout only.

Test a Verizon mobile route
  1. Check the first ring

    From a second number, call your public line and answer on your usual device.

  2. Wait for the fallback

    Call again and let it ring. Verify the greeting is the one you expect at the new destination.

  3. Try a second incoming call

    Call while the public line is in use. A waiting call can act differently from a busy line.

  4. Record the unreachable result

    Power off the receiving mobile phone and test again. If needed, ask Verizon what routing that line supports.

When the phone rings but the call never forwards

Check the entered number and call it directly. If the route works on the Verizon line only intermittently, note the time, the phone’s coverage and whether the caller heard voicemail or a busy signal. On Business Digital Voice check Do Not Disturb and match the User Portal setting to the extension that your main number reaches.

For a garage door repair shop, test an installation estimate before trying an after-hours transfer. Our voicemail comparison shows what the handoff should capture when you leave it unanswered.

Sources

Questions owners ask

What is the difference between *71 and *72 on Verizon?

*71 is Verizon’s mobile code for forwarding a call when the phone is busy or goes unanswered. *72 sends incoming calls straight to the other number. If you want the first chance to pick up your business calls, use *71 and verify with an answered test and a missed one.

Does *71 forward Verizon calls when my phone is off?

Verizon’s device guide describes *71 for busy or unanswered calls. Test with the mobile phone off to check your line’s unreachable behavior and contact Verizon if it differs from the route you need. On Business Digital Voice, ask the administrator to check the separate Business Continuity setting.

How do I undo Verizon call forwarding?

On a Verizon wireless phone, dial *73 and let the confirmation finish. On Business Digital Voice, restore the prior option under Call Settings and save. Place a test call from outside the account afterward and check that it rings where you expect and follows the restored voicemail or fallback.

Hear it answer. Then start free.

Seven-day trial, activated by our team once your line is ready (100 minutes, no card). Then pay monthly by card through our secure checkout. Cancel anytime.

Hear Wenly answer as your business

Your business, your greeting. Answered automatically.